Case
Your Position: Home > Case > Case 3

Case 3

Dec 13, 2023
Read: 34
Share:

Membrane filter press plate by the diaphragm plate and the chamber arrangement of the composition filter chamber, the conveying pump slurry under pressure to enter the filter chamber through the filter media (filter cloth) in the slurry of solid and liquid separation, when the slurry in solid form after the cake, again through the diaphragm into the air, the filter press room full of solid, lower moisture content.

In operation, the pressing device (cylinder piston rod or screw) drives the push plate to press the filter plates and filter cloth between push plate and tail plate Filter chambers are formed between pressed filter plates and materials get into The filter chambers through the feeding port in tail plate. Solid particles are trapped in filter chambers form into cakes, while liquid is discharged out of the machine through press cake and filter cloth. To wash the press cakes, washing water can be introduced through the washing port in the tail Plate. In similar manner, to drying the press cakes, compressed air can be introduced through the washing port.



Related product recommendations
We specialize in new trends analyze and new products developments
Filter Cake Dryer
Filter Cake Dryer
Low temperature residual heat dryer Using heat sources such as smoke, steam, and high-temperature wastewater generated in the factory area..
Filter Plate
Filter Plate
There are three basic categories of filter press plates: recessed chamber, membrane squeeze (diaphragm squeeze) and plate and frame. 
Vacuum Belt Filter
Vacuum Belt Filter
The rubber belt vacuum filter uses filter cloth as the filter medium, and is a separation device that makes full use of material gravity and vacuum suction to achieve solid-liquid separation. The integral annular rubber belt is used as the vacuum chamber. The ring-shaped belt is driven by the motor to run continuously, and the filter cloth is laid on the belt to run synchronously with it, and the belt contacts the ring-shaped friction belt on the vacuum slide table to form a water seal.
LGZ online cleaning centrifuge
PLD Automatic Bottom Discharge Scraper Centrifuge
PLD automatic bottom discharge scraper centrifuge is a new type of product that are developed independently by HUADA, with multiple patents and completely independent intellectual property rights. This series of products is batch-processing separation centrifuge, After discharge, the filter bag can be regenerated, with good filtration and high efficiency, and it can effectively reduce the influence of the residual cake layer on the filtration performance of materials,avoid the cross contamination during material separation,and meet the requirements of GMP and FDA,thus realizing remote intelligent control and automatic production and online fault diagnosis.
Stacked Screw Sludge Dehydrator
Stacked Screw Sludge Dehydrator
The stacked screw type sludge dewatering machine follows the principles of force water co direction, thin layer dewatering...
Chemical Pump
Chemical Pump
MD series Idling vertical acid and alkali resistant pump、MD New Vertical vortex centrifugal pump、MDS stainless steel vertical pump
Get in touch with us
Get all the latest information on Events, Sales and Offers.

    +86 - 18337152875
    sales@gloyelgroup.com
    +86 - 18337152875